Are Cheap AliExpress PTFE Skates Worth It?

A smooth mouse glide depends on the mousepad surface you are using but also on the mouse skates and how scratched up they are. If you like using fast hybrid pads or hard pads like the SkyPad 3.0 just like me then you would have been faced with the same dilemma – how do I keep my mouse glide smooth without spending a fortune on PTFE mouse feet?

Contents

Since I am a SkyPad 3.0 enjoyer I first followed the usual approach of using the mousepad with super high-quality PTFE feet like Tiger Ice, Corepad, Corepad Air, etc. While smooth at the start no matter how much I cleaned the surface of the mousepad and feet, with time and use these just stopped being as smooth as I wanted them to be (as expected you cannot get rid of wear and tear).

While thicker larger feet like the Corepads offer a smoother glide overall, on a SkyPad dust and debris will get stuck in them easier resulting in the screech of death many SkyPad users are accustomed to. The choice was then to use smaller PTFE dots so the chances of things getting stuck in them are lower.

Since buying Tiger Ice dots or BTL dots is not sustainable for anyone changing mouse feet every 2-3 weeks I started looking into alternative ways to acquire a lot of PTFE dots for cheap so I can always have a fresh pair to swap when I start feeling like my SkyPad ate the current ones.

Through some guidance from Discord friends, I have found a couple of AliExpress PTFE dots that looked promising (ex 1 & 2) and have tried them out. In short, these are about 90% as good as the expensive PTFE dots but can be bought in bulk since these are MUCH cheaper.

The glide is smooth and these wear down at the same rate as expensive feet resulting in a lot less guilt about swapping them every week even. You can buy 40 of these PTFE dots for under 2$ and since shipping on AliExpress is usually free and these are cheap items you do not have to pay extra shipping or taxes.

The only real downside is that you will have to wait for the cheap PTFE skates for about a month since AliExpress shipping is notoriously slow.

Another solution to this mouse skate smoothness dilemma could be using glass or ceramic mouse skates. These do not wear down (or if they do the process is extremely slow) making them a good investment.

The issue for me is that you cannot use glass/ceramic skates on a glass mousepad like the SkyPad 3.0 because you will ruin the pad’s surface. If you are using a hybrid/Cordura pad then these might be a good investment.

You need to also consider that these glass skates are much more expensive and their speed will vary depending on the mousepad you are using. On slow cloth pads, glass skates are slower than PTFE, making them a sub-par option, while on hybrid pads the speed is equal to PTFE feet.

For certain users, glass/ceramic skates are not as smooth as PTFE no matter what they try, so sticking to PTFE mouse feet is their only choice.

In short, for people playing on hard surfaces, or those that prefer the PTFE glide, buying a bunch of cheap PTFE skates/dots from AliExpress is a sensible solution to a lot of troubles. Paying pennies for a bunch of PTFE skates makes it so you do not feel pressured into using your current skates until they completely die out, and allows you to enjoy a completely smooth glide at all times.

About The Author

Custom Windows ISO enjoyer, FPS optimizer, and aim improvement enthusiast. Will disassemble all of his peripherals (and sometimes PC parts) to mod them even if all of them work perfectly fine. Discord/Twitter: vile_is_dead

I have question: some people have used cveramic dot skates on skypad 3.0 for many months without any damage or scratches. So this might actually be a viable option? Can you please do some more testing on this? Dont use glass skates as they will wear out but ceramic skates are much more promising.

Hello, there is absolutely no reason to ruin your SkyPad with ceramic dots. I don’t know who the peolpe you are referencing are, but ceramic is a lot harder than glass (both the glass used in the SkyPad and the glass used for skates), and by using it on a SkyPad you are basically killing the surface. SkyPad themselves recommend using only PTFE skates and there are many examples online of people ruining their glass pads with glass/ceramic skates. The only skates that are viable for a glass surface are PTFE or any other compound softer than glass which will… Read more »

The benefits of higher DPI have been well documented for a while now and gamers are slowly moving towards 1600+ DPI. While higher DPI will give you better latency and will allow you to achieve stable higher polling rates the most optimal DPI value will vary from person to person depending on their mouse sensor, […]

A lot of the top-end new mice have the capability of using Motion Sync to synchronize SPI reads with USB polls resulting in less jitter. You can usually find this option on PixArt 3370-3395 sensors or their equivalents (e.g.: Focus+ for Razer), meaning that quite a bit of gamers are debating between using it or […]

A big concern with glass mousepads is that for many they are uncontrollably fast making it hard to recommend to beginner aimers. Another big problem is that PTFE skates wear out quickly on glass surfaces making this item the most common purchase for glass mousepad enjoyers. You can get around by buying cheap (but still […]

The mousepad market is moving extremely fast with releases being put out almost weekly, and constant improvements being made. Glass mouse pads have become quite popular and a lot of companies are trying to release at least one glass mousepad to compete in the fast hardpad category. Padsmith is a mousepad company that is well-known […]

Unlike traditional cloth mousepads glass pads (SkyPad 3.0, Pulsar Superglide, Razer Atlas, Padsmith: The Empress, Cerapad Kin) have an insane advantage when it comes to durability and resistance to wear and tear. Even the most resistant of cloth pads like the MPC 450 wear slowly, whereas a glass surface does not care much about how […]

When choosing a gaming monitor you have to deal with a sheet of specs for each monitor where the manufacturers are trying to blast you with numbers and make you think their product is the best. A lot of those specs however are quite irrelevant to your actual experience and in a lot of cases […]